Zing / MAXX Air Standard Material Blade (Red Blade)

Zing / MAXX Air Standard Material Blade (Red Blade)

Out of stock

Rated 5.00 out of 5 based on 6 customer ratings
(6 customer reviews)

Cut fine detail on materials such as vinyl, iron-on fabric, thin cardstocks and more! The blade angle is 45 degrees.

This blade comes with a spring and fits into the red, blue, and yellow KNK Zing blade holders.

The blade cover (also called the blade cap) is red.

Save 15% Save 15% when you purchase our 5 blade pack of Zing / MAXX Air Standard Material Blades.

 

This product is currently out of stock and unavailable.

Brand: Accugraphics Sales, Inc. MPN: SKU: ZSTANDARD Categories: , ,

Description

Zing and MAXX Air Blades & Blade Holder Notes

  • The blades used by the Zing / MAXX Air are extremely fragile. Do not drop or even bump the blade onto any hard surface as it can chip easily.
  • When not in use, retract the blade into the blade holder or remove and cover the sharp end with the soft plastic cap.
  • Be careful to keep these small blades and their springs in a safe place.
  • Zing / MAXX Air blades have a cutting length of no greater than .09″ which is 2.28mm. So, materials greater than 2.28mm (about 89mil) will not cut well on the Zing / MAXX Air using Zing / MAXX Air blades.
  • Blade holders come in three colors; Blue, Red, Yellow. A blue blade holder is included with the Zing Air Cutting Machine. All three holders are the same except for the color. Each one (no matter the color) can hold the standard, thick or fabric blade. Many people purchase the red and yellow blade holders separately so they can dedicate one for each type of blade they are using.

Additional information

Blade Pack

Single Blade, 5 Blade Pack

6 reviews for Zing / MAXX Air Standard Material Blade (Red Blade)

  1. Rated 5 out of 5

    Marion

    Blade has lasted a long time…ordered new one ( just in case) I loved the quick service and price.
    Great work Joe!

  2. Rated 5 out of 5

    Rhonda

    I’m amazed at how long these blades last. I cut mostly vinyl and I’ve been super pleased.

  3. Rated 5 out of 5

    PaperGrandma

    Hope you are not tired of reading my reviews, but I am a big Zing fan. I get excellent cuts with the blade once it is adjusted correctly for the material I am cutting. The red blade is my vinyl, vellum and light weight paper blade.

  4. Rated 5 out of 5

    scott laughlin

    We have cut over 150 different cards with lots of little do-dads to go on them and lots of vinyl and it still cuts like new. I did snap the tip off my first blade about 1 min after I got it. please make sure you really read the set up and follow it or you will do the same thing I did.. you know its a guy thing to just go for it and it cost me the first blade. good thing I had a spare:)

  5. Rated 5 out of 5

    Pam kent

    I always keep an extra blade but after many cuts I’ve still not had to use it!

  6. Rated 5 out of 5

    Teresa Johnson

    Long lasting blade.

Add a review

Your email address will not be published. Required fields are marked *